Posts Tagged ‘pocket’

In the Hoop projects and more by Angela from the UK

Hello
I am enclosing some pictures of designs I have machine embroidered which I recently purchased from your site. The sunflower bucket took 2 days to make but I love it. The second photo is of the daffodil glasses case, the rococo tissue pocket and the sunflower pen holder. They were all great fun to make.
Regards
Angela Jones

ANGELA01 ANGELA02

Grill Master Flames by Kristin Truskowski

ASP0322_01

My first project with a design from your site. Stitched out so well, I cannot wait to give this to my Uncle. Thanks:) -Kristin Truskowski

 

Tutorial 34 – Unique Cupcake Gift Card Holder

To purchase this set use this link:

http://www.astitchahalf.com/cupcake-gift-card-holder.html

Cupcake Gift Card Holder

01

Step 1 – With Applique it is always a good Idea to use the same Top and Bobbin thread. This ensures a professional finish.

02

Step 2 – You need the following: •Water-Soluble Stabilizer (Hoop 2 layers Perpendicular) •Embroidery Thread (see color chart in download) •Fabric x 1, Size = approx 4” x 4” •Fabric (contrast) x 4, Size = approx 4″x 4″ each •Cut-Away-Stabilizer x 3, Size = approx 4” x 4” •Ribbon (10″/25cm)long and (0.2″/0.5mm) wide

03

Step 3 – Hoop the 2 layers water-soluble stabilizer perpendicular for best results.

04

Step 4 – Stitch the 1st Color Stop. Place 1 layer “cut-away-stabilizer” on top of the running stitch and place the fabric on top of the “cut-away-stabilizer”

05

Step 5 – Close up view

06

Step 6 – Cut away the excess fabric and excess “cut-away-stabilizer”

07

Step 7 – Close up view

08

Step 8 – Stitch the next color stop. This will be the Lace Fill and the Top satin Edge.

09

Step 9 – Stitch the next color stop. Remove the hoop from the embroidery machine and turn over.

10

Step 10 – Place 1 layer of fabric, then 1 layer “cut-away-stabilizer”, then again 1 layer of fabric to the BACK. Use fabric adhesive spray to hold these layers in place while stitching.

11

Step 11 – Front view after the BACK layers were stitched.

12

Step 12 – Back view after BACK layers were stitched. Cut away the excess fabric. Remember to cut away the fabric inside the tiny “ribbon-hole”

13

Step 13 – Cut away the stabilizer from the inside of the “ribbon-hole”.

14

Step 14 – FRONT VIEW – Also cut away the stabilizer from the INSIDE of the cupcake. Be careful not to cut the fabric.

15

Step 15 – Your pocket will now be open, after the water-soluble stabilizer has been cut away.

16

Step 16 – Stitch the last color stop. This is the Final Satin Outline.

17

Step 17 – Rear View after last Color Stop

18

Step 18 – Remove designs from Hoop. Cut away the water-soluble stabilizer. Use a wet Q-tip to remove the whiskers around the edges.

19

Step 19 – Insert your GIFT CARD or TEA BAG etc. Thread a Ribbon through both holes and finish with a Bow.

20

Step 20 – Your Cupcake Pocket is done.

21

Step 21 – Rear view

24

To purchase this set use this link: http://www.astitchahalf.com/cupcake-gift-card-holder.html Cupcake Gift Card Holder


2223